PK 35 PROFILE and PIPE BENDING
PK 35
• Steel construction frame
• Two bottom rolls direct driven by gear system
• Top roll is idle
• Hardened rolls
• Rolls shafts are special hardened steel and ground
• Standard rolls
• Adjustable guide rolls
• Horizontal and vertical working position
GENERAL
OPTIONAL
1
2
3
4
5
6
7
8
9
| PK | 35 | |
|---|---|---|
| Roll Shafts | Ømm | 50 |
| Upper Roll Diameter | Ømm | 155 |
| Working Speed | m/min | 4,5 |
| Motor Power | kW | 1,5 |
| L Length | mm | 750 |
| W Width | mm | 1000 |
| H Height | mm | 1400 |
| Weight | kg | 400 |
| PK 30 | PK 35 | HPK 40 | HPK 50 | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Profile | Size | Min. Dia | Size | Min. Dia | Size | Min. Dia | Size | Min. Dia | Notes |
 | 50×10 20×6 | 800 300 | 60×10 40×10 | 500 400 | 35×8 | 300 | 60×10 20×10 | 600 300 | Standard Rolls |
 | 80×15 30×6 | 700 400 | 100×15 60×10 | 450 350 | 50×12 | 400 | 100×15 50×10 | 600 300 | Standard Rolls |
 | 30×30 10×10 | 900 200 | 35×35 20×20 | 900 300 | 18×18 | 250 | 35×35 15×15 | 600 300 | Standard Rolls |
 | Ø 30 Ø 10 | 900 200 | Ø 35 Ø 30 | 600 400 | Ø 22 | 200 | Ø 35 Ø 20 | 600 300 | Optional Rolls |
 | Ø 60”x1,5 Ø 25×1,5 | 1000 600 | Ø 70×2 Ø 30×2 | 1000 500 | Ø 40×1.5 | 500 | Ø 70×2 Ø25×1,5 | 1200 400 | Optional Rolls |
 | 1 1/2”x2,9 1/4”x1,8 | 600 300 | 2”x2,9 1”x2,3 | 1000 350 | Ø 33.7×2.3 | 200 | 2”x2,9 1/2”x2,3 | 1000 300 | Optional Rolls |
 | 50x30x3 40x20x2 | 1200 800 | 70x30x2 50x40x3 | 1200 1200 | 30x15x2.5 | 500 | 70x30x3 30x15x2 | 1500 400 | Optional Rolls |
 | 40×3 30×2 | 1200 800 | 50×3 40×3 | 1700 600 | 25x25x2 | 450 | 50×3 20×2 | 1600 400 | Optional Rolls |
 | 40x40x5 30x30x4 | 600 300 | 50x50x5 40x40x5 | 800 600 | 35x35x5 | 400 | 50x50x6 30x30x3 | 600 400 | Optional Rolls |
 | 35x35x5 30x30x4 | 600 400 | 50x50x6 30x30x3 | 1000 500 | 30x30x4 | 550 | 50x50x6 30x30x3 | 900 600 | Optional Rolls |
 | 50×6 20×3 | 600 400 | 60×7 30×4 | 700 400 | 30x30x5 | 300 | 60×7 30×4 | 600 400 | Standard Rolls |
 | 50×6 20×3 | 600 400 | 60×7 30×4 | 800 500 | 35x35x5 | 350 | 60×7 30×4 | 700 400 | Standard Rolls |
 | 50×6 20×3 | 600 400 | 60×7 30×4 | 700 500 | 35x35x5 | 300 | 60×7 30×4 | 700 400 | Standard Rolls |
 | UPN 80 UPN 30 | 1000 500 | UPN 40×20 | 350 | UPN 80 UPN 30 | 800 400 | Standard Rolls | ||
 | UPN 80 UPN 30 | 1200 800 | UPN 35×18 | 500 | UPN 80 UPN 30 | 1200 600 | Standard Rolls |
